Rural King RK37 Hydrostatic Скачать руководство пользователя страница 26

Страница: 26 / 182

- 2

SAFETY PRECAUTIONS

pressure to escape before re-

moving the cap entirely.

4. Do not smoke while the refueling

the tractor. Keep away any type

of open flame.

5. The fuel in the injection system is

under high pressure and can pen-

etrate the skin. Unqualified per-

sons should not remove or at-

tempt to adjust a pump, injector,

nozzle or any part of the fuel in-

jection system.

Failure to follow these instruc-

tions can result in serious injury.

6. Keep open flame away from bat-

tery or cold weather starting aids to

prevent fire or explosions.

7. Do not modify or alter or permit

anyone else to modify or alter this

tractor or any of its components or

any tractor functions.

<OPERATING THE TRACTOR>

1. Before starting the tractor apply

the parking brake, place the PTO

(Power Take Off) lever in the “OFF”

position, the hydraulic control le-

vers in the downward position, the

remote control valve levers in the

neutral position (If fitted) and the

transmission in neutral.

2. Do not start the engine or con-

trols while standing besides the

tractor. Always sit on the tractor

seat when the engine or operat-

ing controls.

3. Safety starter switch.

In order to prevent the acciden-

tal starting of the tractor, a safe-

ty switch has been provided. The

starting system of the tractor is con-

nected through this switch, which

becomes operative only when

the clutch pedal is depressed. On

some models shuttle shifter lever

and PTO button should also be in

neutral position for completing the

starting circuit. Do not bypass the

safety starter switch. Consult your

RK Tractor store

if safety- starting

switch malfunctions.

4. Avoid accidental contact with

the gear shifter lever while the

engine is running. Unexpect-

ed tractor movement can result

from such contact.

5. Do not get off or climb the trac-

tor while it is in motion.

6. Shut off the engine, remove the

key and apply the parking brake

before getting off the tractor.

7. Do not operate the tractor in an

enclosed building without ad-

equate ventilation. Exhaust

fumes can cause death.

8. Do not park the tractor on a

steep slope.

9. If power steering or Engine seiz-

es to operate, stop the tractor

immediately.

RK37S,RK37SC-영문-01A(안).indd 25

2018-12-06 오후 4:33:00

Содержание RK37 Hydrostatic























































































































































































Результаты поиска

Содержание RK37 Hydrostatic

Отзывы:

Rural King RK37 Hydrostatic, Руководство оператора, Страница: 26 / 182

Результаты поиска

Содержание RK37 Hydrostatic

Отзывы: