Rural King RK37 Hydrostatic Скачать руководство пользователя страница 119

Страница: 119 / 182

6 -

CABIN SYSTEM

1. MAJOR FEATURES

The cab fully conforms to the inter-

national standard as far as safety

and soundproofing are concerned.

It can be provided with ventilation,

heating and air-conditioning system.
It is available in the following ver

sion:



Cab with ventilation and heating

systems.



Cab with ventilation, heating and

air-conditioning systems.

The cab is in full conformity

with the international standards

as to the cab’s soundproofing.

Be very careful when operat-

ing in small spaces and always

protect your ears whenever oth-

er working equipment is gener

ating dangerous noise levels.

•

CAUTION

Remember that steering, brak

ing and operational performanc

es are highly influenced by the

implements mounted, the trail-

ers transported and the ballasts

applied to the tractor

•

CAUTION

When transporting heavy loads

(Exceeding the weight of the

tractor) reduce the speed under

15 Km/h (9.32 m/h).

•

CAUTION

All the implements mounted

onto the tractor must be safely

secured.

•

CAUTION

T39O603A

Working Lamp(Rear)

Rear Wiper

Door Handle

Air Filter

RK3O601A

Front wiper

Working Lamp

Rear Mirror

RK37S,RK37SC-영문-06(바).indd 2

2017-01-13 오전 10:49:10

Содержание RK37 Hydrostatic























































































































































































Результаты поиска

Содержание RK37 Hydrostatic

Отзывы:

Rural King RK37 Hydrostatic, Руководство оператора, Страница: 119 / 182

Результаты поиска

Содержание RK37 Hydrostatic

Отзывы: