Rural King RK37 Hydrostatic Скачать руководство пользователя страница 125

Страница: 125 / 182

6 - 8

CABIN SYSTEM

TEMpERATURE CONTROl

Set temperature control as required,

fully clockwise.

For maximum cool and fully coun-

terclockwise for heat.

►

T72O613A

AIR CON SwITCH

To operate the air conditioner,the

blower must be on.The blower

speed temperature control and all

vents must be adjusted to obtain the

best cooling for the ambient temper

ature and dust conditions.
Under normal operating conditions,

and the windows and doors closed,

temperatures in the cab of 10 ºF

to 25 ºF (6ºC to 15 ºC) less than

the ambient temperature will occur.

When operating the air condition

er system,the moisture level is de-

creased.

►

NOTE



During cold weather,with ambi

ent temperature above 32 ºF (0

ºC) operate the air condition

er at least once per month, for

a period of 10 to 15 minutes.

This will lubricate the seals to

prevent them becoming brittle

and help prevent the loss of

refrigerant from the system.



The system is equipped with

an environmentally safe re-

frigerant, R134a. Never re

charge the air conditioning

system with refrigerant other

than R134a as this will result

in loss of cooling and perma

nent damage to all air condi

tioning components.

RK37S,RK37SC-영문-06(바).indd 8

2017-01-13 오전 10:49:16

Содержание RK37 Hydrostatic























































































































































































Результаты поиска

Содержание RK37 Hydrostatic

Отзывы:

Rural King RK37 Hydrostatic, Руководство оператора, Страница: 125 / 182

Результаты поиска

Содержание RK37 Hydrostatic

Отзывы: