Rural King RK37 Hydrostatic Скачать руководство пользователя страница 10

Страница: 10 / 182

SAFETY PRECAUTIONS

If the tractor has rolled over or the

ROPS has damaged (such as strik-

ing an overhead object during trans-

port), It must be replaced to provide

the original protection. After an ac-

cident, check for damages to the

1.ROPS. 2.Seat. 3.seat belt & seat

mountings. Before you operate a

tractor, replace all damaged parts.

Before operating a tractor it is im-

portant to adjust the seat to the

most comfortable position & check

whether it is properly locked in its

position.

DAMAGE OF THE ROPS

WARNING



If the ROPS is removed or re-

placed, make certain that the

proper hardware is used to re-

place the ROPS and the recom-

mended torque values are applied

to the attaching bolts.

WARNING



Do not use solvents to clean

the seat. Use warm water with

a little detergent added.

NOTE

SEAT SLIDING

WARNING



Do not weld, drill or straighten

the ROPS.

WARNING



Always wear your seat belt if

the tractor is equipped with

ROPS.



Never attach chains, ropes to

the ROPS for pulling purpos-

es; this will cause the tractor

to tip backwards. Always pull

from the tractor drawbar. Be

careful when driving through

door opening or under low

overhead objects. Make sure

there is sufficient overhead

clearance for the ROPS fatal

injuries.



Do not put a hand between the

seat and the slides when ad-

justing the seat position. You

can get injured unexpectedly.

CAUTION

T39O003A

Seat Belt

Forward / Backward

adjustment lever

RK3O003A

RK37S,RK37SC-영문-01A(안).indd 9

2018-12-06 오후 4:32:37

Содержание RK37 Hydrostatic























































































































































































Результаты поиска

Содержание RK37 Hydrostatic

Отзывы:

Rural King RK37 Hydrostatic, Руководство оператора, Страница: 10 / 182

Результаты поиска

Содержание RK37 Hydrostatic

Отзывы: