Rural King RK37 Hydrostatic Скачать руководство пользователя страница 20

Страница: 20 / 182

- 1

SAFETY PRECAUTIONS

When attaching or detaching the

loader, fix all parts which are con-

nected to the bucket and boom. The

bucket or boom can be accidental-

ly dropped down, leading to an inju-

ry or even death.

T74O227A

Do not allow loader arms or attach-

ment to contact electrical power

lines. Electrocution will cause seri-

ous injury or death.

T74O229A

T74O228A

IMPORTANT



ROPS (Roll Over Protective

Structure), sun canopy or cab-

in are not a FOPS (Falling Ob-

ject Protective Structure).

It never can protect the riders

against falling objects.

Avoid driving the vehicle into

a dangerous area such as fall-

ing rocks zone.

RK37S,RK37SC-영문-01A(안).indd 19

2018-12-06 오후 4:32:54

Содержание RK37 Hydrostatic























































































































































































Результаты поиска

Содержание RK37 Hydrostatic

Отзывы:

Rural King RK37 Hydrostatic, Руководство оператора, Страница: 20 / 182

Результаты поиска

Содержание RK37 Hydrostatic

Отзывы: