Rural King RK37 Hydrostatic Скачать руководство пользователя страница 152

Страница: 152 / 182

9 -

Safety Standard for farm work

439

4. cautIonS when drIvIng on the farm road



Driving on roads

- Drive safely observing the relevant regulation.

- Drive at safe speed.

- Be careful not to disturb other drivers.

- When driving a machine with sharp blade or bump,

put on a warning sign or detach in advance to pre-

vent any injury.

- Do not drive fast particularly on winding roads with

projecting rocks.

- When driving at night, do not detach lighting device.

(headlight, turn indicator, work light, brake light, etc)

- Do not drive fast, abrupt starting, abrupt accelera-

tion, sudden stop, and quick turning.

- When driving at high speed, do not slam on the

brake. Never slam on the brake especially when

turning at high speed.



When loading/unloading the machine

- Choose a place with a leveled and safe ground.

- Drive at low speed.

- Use a ramp with anti-slippery.



When entering paved road

- Use a ramp to cross a ditch or a bank.

- Make sure to use a ramp to enter/exit a high foot-

path Be careful with fall and not to overturn.

- Check the safety around the surrounding before

starting to drive.



When driving on a slope

- Drive at the minimum speed, lower the operating ma-

chine as low as possible and low the center position.

- Place the key clutch in neutral position or do not de-

press the key clutch pedal.

RK37S,RK37SC-영문-09(자).indd 5

2017-03-09 오전 9:56:50

Содержание RK37 Hydrostatic























































































































































































Результаты поиска

Содержание RK37 Hydrostatic

Отзывы:

Rural King RK37 Hydrostatic, Руководство оператора, Страница: 152 / 182

Результаты поиска

Содержание RK37 Hydrostatic

Отзывы: