Rural King RK37 Hydrostatic Скачать руководство пользователя страница 105

Страница: 105 / 182

5 - 1

Maintenance and service

Do not hit the element with

a rock or concrete during its

cleaning.
Make sure to install the element

firmly.

Tighten each part of the air

cleaner securely to block dust

completely.

•

nOte

air cleaner cleaning

①

Blow compressed air from the

inside toward the outside of the

element. Keep proper distance

between the air nozzle and ele-

ment.

air cleaner replacing

After cleaning the element 5 times

or if it is damaged, replace it with a

new one.

►

8. adjusting tread

adjusting FrOnt Wheel

tread

It can be adjusted in two steps by

switching the left and right tires and

discs.

adjusting rear Wheel

tread

It can be adjusted in four steps by

switching the left and right tires and

discs.

►

After adjusting the wheel tread,

the vehicle's breadth and turn-

ing radius are changed. Keep

this in mind during driving.

•

cautiOn

For safety, have tread adjust-

ment performed by your RK

Tractor store or workshop.
Never remove tires if there is

no safe supporting device. The

tractor can roll over.

•

Warning

RK37S,RK37SC-영문-05(마).indd 12

2018-12-11 오전 8:47:43

Содержание RK37 Hydrostatic























































































































































































Результаты поиска

Содержание RK37 Hydrostatic

Отзывы:

Rural King RK37 Hydrostatic, Руководство оператора, Страница: 105 / 182

Результаты поиска

Содержание RK37 Hydrostatic

Отзывы: