Rural King RK37 Hydrostatic Скачать руководство пользователя страница 149

Страница: 149 / 182

9 -

Safety Standard for farm work

Safety mark

1. InStructIon before uSe



Operator must attend his/her health and should get

enough rest.



Before using the machine, check it and repair if there

is a malfunction.

- Check if the assembly of front and rear wheels is

okay.

- Check the tightening of bolts and nuts in each unit.



Do not drive if you are mentally unstable, drunk, preg-

nant, under the age of 6, not trained, overworked,

sick, under the influence of drugs, and any other rea

son that may affect normal operation of the machine.



Please wear the appropriate working clothing.

- Put on a hard hat to protect your head.

- Put on a hat and a working clothes, to prevent an in-

jury such as being twined into the machine.

- Protective measures to prevent any injury on foot or

slipping - Put on an appropriate non-slippery shoes

to prevent a fall from the machine, scattering soil,

and slippery surface.

- Measures against dust and toxic gas.

- Wear an appropriate protective gear.

- Measures against the herbicide – wear protective

gear to protect respiratory system, eyes and skin.

Excerpted from general information system of agricultur-

al mechanic research center (August, 00) 8.)

Agricultural Mechanic Research Center, an affiliation of

Ministry of Agriculture and Forestry stipulated "safety in-

structions" when working with agricultural equipment for

safety purpose.
Please read carefully the contents as the user’s manual.

Try to work safely.



Always make sure to check the operating condition of

the safety lamp (such as turn signal lamp) before op-

erating the machine.

※

If any lighting system is removed

※



It may lead to an unexpected accident because it

is not possible to give signals to people or machine

nearby.

RK37S,RK37SC-영문-09(자).indd 2

2017-03-09 오전 9:56:50

Содержание RK37 Hydrostatic























































































































































































Результаты поиска

Содержание RK37 Hydrostatic

Отзывы:

Rural King RK37 Hydrostatic, Руководство оператора, Страница: 149 / 182

Результаты поиска

Содержание RK37 Hydrostatic

Отзывы: