Rural King RK19 Hydrostatic Скачать руководство пользователя страница 98

Страница: 98 / 156

5 - 15

Maintenance and service

435

<charging>

①

Turn the ignition switch to the

"OFF" position and remove the

battery from the tractor.

②

Charge the battery in a well-

ventilated area.

③

Charge the battery with the nor-

mal procedures and avoid quick

charging.

④

Turn the charger switch OFF and

connect the cables to the nega-

tive and positive battery termi-

nals correctly.

⑤

When using a charger, its charg-

ing current should be below 10 A.

T5O51A

Negative (-)

terminal (black)

Positive (+)

terminal (red)

juMp start

①

Turn off all electric devices.

②

Connect the positive terminal of

the normal battery to the positive

terminal of the discharged battery

with the jump cable.

③

Connect the negative terminal

of the normal battery to the en-

gine body of the tractor for the

discharged battery with the jump

cable.

►

T5O5A

④

Firstly, start the engine of the vehi-

cle with the normal battery. Then,

start the engine of the tractor with

the discharged battery.

⑤

After the engine is started, discon-

nect the negative cable first. Then,

disconnect the positive cable.

⑥

Charge the discharged battery for

approx. 30 minutes after the en

gine is started.

Make sure to connect the posi-

tive terminal first and connect

the negative terminal to the en-

gine body of the tractor with the

discharged battery.

•

Warning

RK19-영문-05(마).indd 15

2017-05-18 오후 6:35:27

Содержание RK19 Hydrostatic





























































































































































Результаты поиска

Содержание RK19 Hydrostatic

Отзывы:

Rural King RK19 Hydrostatic, Руководство оператора, Страница: 98 / 156

Результаты поиска

Содержание RK19 Hydrostatic

Отзывы: