Rural King RK19 Hydrostatic Скачать руководство пользователя страница 142 | Manualshive

Страница: 142 / 156

Rural King RK19 Hydrostatic Скачать руководство пользователя страница 142

11

-

WARRANTY

11

timing gear, and gear case. The warranty period for both the standard limited warranty and the extended limited
warranty (by duration or operation hours) begins on the date of delivery to the original retail purchaser and is valid
only until the applicable warranted duration has passed or the operation hours are exceeded, whichever comes
first.

What is not Covered by this Warranty?

This  warranty  does  not  cover  parts  affected  by  or  damaged  by  any  reason  other  than  defective  materials  or
workmanship, including, but not limited to, accident, misuse, abuse, "Acts of God," neglect, improper installation,
improper maintenance, improper storage, the use of unsuitable attachments or parts, the use of contaminated
fuels,  the  use  of  fuels,  oils,  lubricants,  or  fluids  other  than  those  recommended  in  your  ENGINE  Operation
Manual, unauthorized alterations or modifications, ordinary wear and tear, and rust or corrosion. This warranty
does not cover the cost of parts and/or labor required to perform normal/scheduled maintenance on your ENGINE
engine. This  warranty  does  not  cover  consumable  parts  such  as,  but  not  limited  to,  filters,  belts,  hoses,  fuel
injector, lubricants and cleaning fluids. This warranty does not cover the cost of shipping the product to or from
the warranty repair facility.

Warranty limitations:

The foregoing is ENGINE's only obligation to you and your exclusive remedy for breach of warranty. Failure to
follow the requirements for submitting a claim under this warranty may result in a waiver of all claims for damages
and other relief. In no event shall ENGINE or any authorized industrial engine dealer or distributor be liable for
incidental, special or consequential damages. Such consequential damages may include, but not be limited to,
loss of revenue, loan payments, cost of rental of substitute equipment, insurance coverage, storage, lodging,

RK19-영문-11-보증서.indd 3

2017-05-18 오후 6:46:04

«
...
140
141
142
143
144
...
»

Содержание RK19 Hydrostatic





























































































































































Отзывы:

Нет отзывов