Rural King RK19 Hydrostatic Скачать руководство пользователя страница 146 | Manualshive

Страница: 146 / 156

Rural King RK19 Hydrostatic Скачать руководство пользователя страница 146

11

-

WARRANTY

11

Warranty Coverage:

This warranty is transferable to each subsequent purchaser for the duration of the warranty period. Repair or
replacement of any warranted part will be performed at an authorized ENGINE or distributor.
Warranted  parts  not  scheduled  for  replacement  as  required  maintenance  in  the  owner's  manual  shall  be
warranted for the warranty period. Warranted parts scheduled for replacement as required maintenance in the
owner's  manual  are  warranted  for  the  period  of  time  prior  to  the  first  scheduled  replacement. Any  warranted
parts scheduled for replacement as required maintenance that are repaired or replaced under warranty shall be
warranted for the remaining period of time prior to the first scheduled replacement. Any part not scheduled for
replacement that is repaired or replaced under warranty shall be warranted for the remaining warranty period.
During the warranty period, ENGINE is liable for damages to other engine components caused by the failure of
any warranted part during the warranty period.
Any replacement part which is functionally identical to the original equipment part in all respects may be used in
the maintenance or repair of your engine, and shall not reduce ENGINE's warranty obligations.
Add-on  or  modified  parts  that  are  not  exempted  may  not  be  used. The  use  of  any  non-exempted  add-on  or
modified parts shall be grounds for disallowing a warranty.

Warranted Parts:

This warranty covers engine components that are a part of the emission control system of the engine as
delivered by ENGINE to the original retail purchaser. Such components may include the following:

(A) Fuel injection system

(B) Electronic control system

(C) Cold start enrichment system

RK19-영문-11-보증서.indd 7

2017-05-18 오후 6:46:05

«
...
144
145
146
147
148
...
»

Содержание RK19 Hydrostatic





























































































































































Отзывы:

Нет отзывов