Rural King RK19 Hydrostatic Скачать руководство пользователя страница 5

Страница: 5 / 156

SAFeTY PReCAUTIONS

2. ABOUT THIS MANUAL

This manual has been prepared to

assist you in following/adopting the

correct procedure for running-in op-

eration and maintenance of your

new

RK Tractors (

Here in after re-

fer to

) tractor.

Your tractor has been designed and

built to give maximum performance,

with good fuel economy and ease

of operation under a wide variety

of operating conditions. Prior to de-

livery, the tractor was carefully in-

spected, both at the factory and by

your

RK Tractor store

, to ensure

that it reaches you in optimum con-

dition. To maintain this condition and

ensure trouble free performance. it

is important that the routine servic-

es, as specified in this manual, are

carried out at the recommended in-

tervals.

Read this Manual carefully and

keep it in a convenient place for fu-

ture reference. If at any time you re-

quire advice concerning your trac-

tor, do not hesitate to contact your

Authorized

RK Tractor store

. He

has trained personnel, genuine

parts and necessary equipments to

undertake all your service require-

ments.
Manufacturer’s policy is one of con-

tinuous improvement, and the right

to change prices, specifications or

equipments at any time without no-

tice is reserved.
All data given in this book is sub-

ject to production variations. Dimen-

sions & weight are approximate only

and the illustrations do not neces-

sarily show tractors in standard con-

dition. For exact information about

any particular tractor, please consult

your

RK Tractor store

RK19-영문-01A(안).indd 4

2017-05-19 오전 9:41:13

Содержание RK19 Hydrostatic





























































































































































Результаты поиска

Содержание RK19 Hydrostatic

Отзывы:

Rural King RK19 Hydrostatic, Руководство оператора, Страница: 5 / 156

Результаты поиска

Содержание RK19 Hydrostatic

Отзывы: