Rural King RK19 Hydrostatic Скачать руководство пользователя страница 79

Страница: 79 / 156

4 -

Work Procedure

(1) When driving the tractor to at-

tach or detach an implement,

make sure that there is no one

in between or around the tractor

and implement.

() Install and remove the imple-

ment only on safe and level

ground.

(3) When installing a heavy imple-

ment, install weight on the front

to keep balance.

(4) When adjusting an implement,

apply the parking brake, stop the

engine and set the PTO switch

in the OFF position in advance.

(5) To tow anything, use the towing

hitch only.

rotavator

<safety precautions for rotavator>

Never remove the safety cover

of the rotavator.
Do not remove the PTO shaft

cover and safety cover on the

universal joint.
When adjusting each part, disen-

gage the PTO and stop the en-

gine in advance.
When driving on a road, keep

the PTO disengaged. Also, keep

the rotavator lowered on a road

as long as it does not hit the

ground.
For the universal joint, its inner

shaft and outer shaft should be

overlapped at least 5,9 in.(15 cm).
Check that the universal joint is

firmly fixed to the tractor and ro

tavator shaft.

►

•

1. Precautions for handling imPlement

2. general imPlement

Read instructions on warning de-

cals on each implement thorough-

ly before work.
To avoid an injury due to mishan-

dling of an implement, read the

user's manual of the implement

thoroughly and work safely and

precisely with caution.
Installation of an improper imple-

ment can lead to an injury. Install

only implements specified by the

Manufacturer.

•

WARNING

RK19-영문-04(라).indd 2

2017-05-18 오후 6:26:03

Содержание RK19 Hydrostatic





























































































































































Результаты поиска

Содержание RK19 Hydrostatic

Отзывы:

Rural King RK19 Hydrostatic, Руководство оператора, Страница: 79 / 156

Результаты поиска

Содержание RK19 Hydrostatic

Отзывы: