Rural King RK19 Hydrostatic Скачать руководство пользователя страница 124

Страница: 124 / 156

8 -

Safety Standard for farm work

439

438

- Measures against noise – wear a protective gear to

protect your ears.

- Handling protective gear – Do neither let children

get on the machine nor get close to the machine.



If it is not possible to park the agricultural machine

on a road either due to a breakdown or any other rea-

son, operator must take an action such as moving the

equipment to a place other than a road.



Also, put a signal that there is a broken car, 00m be-

hind and 00m at night in accordance with Automo-

bile Regulation Article .



When starting to drive, make sure to check around

carefully.

- Do not let anyone such as a child get close to the ma-

chine, keep them away and then drive the machine.



Do not load flammable, explosive material (diesel,

gasoline , etc) on the machine.



When getting on and off a truck, have a helper give

you signal and follow his/her lead.



Refer to chapter

in user’s manual regarding the decals

on the machine.

2. checkup lISt before operatIon



Before using the machine, check it and repair if there

is a malfunction.



Check engine oil.

- Pull out level gauge, wipe off any fuel leak, put it back

in, and pull it out again to see if the oil level is be-

tween

「

upper limit

」

and

「

lower limit

」



Before any operation, check for any foreign materi-

als caught on the engine, muffler, battery, and the fuel

tank. Remove them immediately.



Covers that are removed during the maintenance

work should be reinstalled to their original positions.

- Attach the cover correctly and firmly.

RK19-영문-08(아).indd 3

2017-03-07 오후 4:24:15

Содержание RK19 Hydrostatic





























































































































































Результаты поиска

Содержание RK19 Hydrostatic

Отзывы:

Rural King RK19 Hydrostatic, Руководство оператора, Страница: 124 / 156

Результаты поиска

Содержание RK19 Hydrostatic

Отзывы: