Rural King RK19 Hydrostatic Скачать руководство пользователя страница 58

Страница: 58 / 156

2 - 1

DESCRIPTION OF TRACTOR CONTROLS

Sub Shift Lever

DIFFERENTIAL LOCK PEDAL

The differential lock is a device to

lock the differential system in order

to rotate the left and right wheels at

the same speed. This function can

be used when the rear wheels slip

or one wheel spins.

Engagement - Depressing pedal

Disengagement - Releasing pedal

►

Differential lock pedal

When the range shift lever is

placed in the position "H," the

driving speed increased. There-

fore, never put the range shift

lever in the position "H" during

driving backwards.

•

WARNING

Operate the range shift lever only

after the tractor is completely

stopped and with the brake pedal

depressed. Shifting the lever dur-

ing driving can damage the gears.

•

NOTE

T19O123A

T19O124A

Never use the differential lock

when driving on a road. A colli-

sion or rollover can occur.
Make sure to release it during

turning. Otherwise, it can lead

to an injury or accident.

•

WARNING

When using the differential lock,

run the engine at a low speed.
If differential lock is still not

disengaged after releasing the

differential lock pedal, gently

depress the left and right brake

pedals alternately.

•

NOTE

RK19-영문-02(나).indd 15

2017-05-18 오후 6:22:49

Содержание RK19 Hydrostatic





























































































































































Результаты поиска

Содержание RK19 Hydrostatic

Отзывы:

Rural King RK19 Hydrostatic, Руководство оператора, Страница: 58 / 156

Результаты поиска

Содержание RK19 Hydrostatic

Отзывы: