Rural King RK19 Hydrostatic Скачать руководство пользователя

Страница: 9 / 156

SAFeTY PReCAUTIONS

5. ROPS (ROLL OVeR PROTeCTIVe STRUCTUReS)

tractors are equipped with a

frame for the protection of opera-

tors.
In the case of cab tractors the frame

is incorporated in the cab structure.
The objective of the frame or cab

structure is to protect the operator in

the event of a roll over
and they are designed to support

the entire weight of the tractor in

that event.
Each

ROPS frame or cab struc-

ture is designed and has been test-

ed to meet industry and or govern-

ment standards.
Included in these tests were all

mounting bases and bolts or other

fasteners.

As the ROPS frame or cab together

with the seat belt was designed to

meet certain standards, they must

be maintained in good order and

condition. To achieve this objective,

both the structure and the seat belt

should be inspected on a regular

basis. (Every time the tractor is ser-

viced)
In the event that the seat belt is

damaged or frayed, it should be re-

placed and in the event that the

ROPS frame or any part of the

mounting structure is damaged or

cracked, the faulty component must

be replaced with a new unit. Such a

unit must meet all of the test criteria

of the original unit. Fitment of an in-

ferior item or items affects the certi-

fication of the entire ROPS structure

and the effectiveness of the struc-

ture in the event of an accident.

Drilling or welding of the ROPS

structure is forbidden.

ROLL OVeR PROTeCTIVe STRUCTUReS (ROPS)

USe OF THe TRACTOR WITH THe ROPS

LOWeReD CAN CAUSe FATAL INJURIeS

On some models the ROPS frame

has a fold down feature, which can

be used to enter low buildings etc.
Take care when lowering the upper

section of the ROPS frame and take

extreme care while driving the tractor

with the ROPS frame lowered.
Do not wear the seat belt with

the ROPS lowered and please

remember that the fold down facility

is for special circumstances only and

must not be lowered for general use.

For ROPS frames to be effec-

tive and protect the operator,

the seat belt provided must

be worn in order to keep

operators within the ROPS

protected area in the event of

a roll over. Failure to use the

seat belt can still cause seri-

ous injury or death.

•

DANGER

RK19-영문-01A(안).indd 8

2017-05-19 오전 9:41:16

Содержание RK19 Hydrostatic





























































































































































Результаты поиска

Содержание RK19 Hydrostatic

Отзывы:

Похожие инструкции для RK19 Hydrostatic

Бренды по названию

Популярные бренды

Rural King RK19 Hydrostatic, Руководство оператора

Результаты поиска

Содержание RK19 Hydrostatic

Отзывы:

Похожие инструкции для RK19 Hydrostatic

Бренды по названию

Популярные бренды