Rural King RK19 Hydrostatic Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 156

Rural King RK19 Hydrostatic Скачать руководство пользователя страница 40

1

1 - 5

GENERAL INFORMATION

2. SAFETY SIGNS



In order to work with the machine safely, safety decals are placed on the machine.



Make sure to read and follow the directions.

■

Keep the safety decals clean and undamaged at all times.

If a safety decal on the machine is dirty, wash it with soapy water and wipe it off with a soft cloth.
Never use solution as thinner or acetone because these can erase characters or pictures.

■

If washed with high-pressured water, a decal may be peeled off.

Do not apply high-pressured water directly onto decals.

■

If a safety decal is damaged or lost, order a new one immediately and place it on

the machine.

When putting a new decal, wipe off the place to post the decal thoroughly and wait until it is dried. Then
post the decal.
Each decal has a part number on the bottom.

■

When replacing a part attached with a decal with a new part, replace the decal as

well.

RK19-영문-01B(가).indd 5

2017-05-18 오후 6:38:01

«
...
38
39
40
41
42
...
»

Содержание RK19 Hydrostatic





























































































































































Отзывы:

Нет отзывов