Rural King RK19 Hydrostatic Скачать руководство пользователя страница 110

Страница: 110 / 156

6 -

Storage and diSpoSal

USe after long-term Storage

Keep the following instructions

when using the tractor after its long-

term storage.
(1) Inspect the tractor thoroughly

before driving it.

(2) To keep performance and life of

the engine, idle the engine for ap

prox. 30 minutes after starting it.

►

2. USage and diSpoSal

For engine lubrication, run the en-

gine at 1.500 ~ .000 RPM for 5

to 10 minutes once a month.

Remove the key from the tractor

and store it separately.

•

note

If leaving the battery connected to

the tractor, turn off its switch to cut

electric power.

If wiring is damaged by rodents,

its short circuit can start a fire.

•

caUtion

It is recommended to keep the fol

lowings to protect the environment:
(1) Avoid overloading work as it can

lead to incomplete combustion

and emissions that can pollute

the air.

()

When changing oil, including en

gine oil, transmission fluid, hy

draulic oil and coolant, be careful

not to spill it and discard used oil

according to the applicable law.

Used oil should be treated with

care and discarded properly as it

can contaminate soil and water.

() When this or other machine's life

is expired, do not neglect or dis

card it on your own, but contact

your RK Tractor store so that the

approved service provider can

discard the machine according

to the laws.

RK19-영문-06(바).indd 3

2017-05-19 오전 9:47:29

Содержание RK19 Hydrostatic





























































































































































Результаты поиска

Содержание RK19 Hydrostatic

Отзывы:

Rural King RK19 Hydrostatic, Руководство оператора, Страница: 110 / 156

Результаты поиска

Содержание RK19 Hydrostatic

Отзывы: