RS PRO RM-804, Инструкция по эксплуатации, Страница: 14 / 207

RM-804 & RM-805 Instruction Manual/English
12 13/10/2016 Version No. 001
Testing resistance of switches and connectors according to the DIN IEC
512 and ASTM B539 standards. The open circuit voltage will not
exceed 20mV in this mode to prevent the oxidization layer on
metal switches and connector points from breakdown. RM-805
only.
Automatic
Testing
For automatic testing The RM-804/805 has a handler interface
designed for automatic testing. The handler interface outputs the
status of PASS, FAIL, HI, LO, READY and EOT signals and
inputs a trigger control signal. Automatic testing is used with the
binning, compare and scan functions.
For computer control applications, RS-232 and USB are standard
remote interfaces, with GPIB as standard only for the RM-805
and RM-804G.
Applications

Production testing for contact resistance of switches, relays,
connectors, cables and printed circuit boards and other low
resistance devices.

Component testing of resistors, motors, fuses and heating
elements.

Incoming inspection and quality assurance testing.

Conductivity evaluation for product design.