manualshive.com logo in svg

Ross Carbonite Black Series, Руководство по эксплуатации, Страница: 51 / 64

Поделиться
Скачать
Ross Carbonite Black Series Скачать руководство пользователя страница 51

Icon

Name

Description

Looping

Turns 

Looping

 of the

animation on or off.

Reverse

Toggle the direction that the

animation is played in.

Recue

Loads the animation again.

Eject

Eject the current still or

animation from the Media-

Store channel. This is the

same as loading media

number 

000

 on the panel.

Playlists

Playlists allow you to create a rundown of stills or

animations that you want to load into a Media-Store

channel. Using the left and right arrows, you can

advance to the next or previous still or animation in the

playlist.

Note: 

 Items on the playlist are not pre-cached. As you

advance to the next item in the list, the switcher must load

that still or animation. Depending on what you are loading,

and if the item has been loaded before, this could take a few

seconds.

Figure 21: Playlist

Table 5: Playlist Controls

Icon

Name

Description

Previous

Advance to the previous

item in the playlist. The item

in the playlist that is being

shown on the Media-Store

channel indicated with a

check-mark. The playlist

does not loop back to the top

when it reaches the last item.

Next

Advance to the next item in

the playlist.

Up and Down

Move the currently selected

item up in the playlist.

Up and Down

Move the currently selected

item down in the playlist.

Icon

Name

Description

Delete

Delete the selected item from

the playlist. This does not

delete the item, or clear the

Media-Store channel.

New Playlist

Clears the current playlist.

Load or Save

Playlist

Allows you to load, save,

or delete a playlist on the

switcher. If you delete a

playlist that was loaded into a

Media-Store channel, it does

not clear that channel.

Expand or

Collapse

Expand or Collapse the

playlist area for the Media-

Store channel.

Carbonite Black Operation Manual (v14.0) — Media-Store • 

51

Содержание Carbonite Black Series

































































Отзывы:

Нет отзывов