Ross Carbonite Black Series, Руководство по эксплуатации, Страница: 36 / 64

To Apply a DVE to a Key (Fly Key)
The DVE resources for this key may not be available.
Depending on how your switcher is configured, you
may be asked to steal the resources from another
element, or be prevented from using the resources.
You should set up your key as you want it before
applying the Fly Key.
1. Press and hold SELF KEY , AUTO SELECT ,
or
CHR KEY
for the key you want to apply the
DVE to and press DVE . Click Navigation Menu
> Live Assist > ME and select the ME and key
that you want to set up.
Tip:
Hold the
SELF KEY
,
AUTO SELECT
, or
CHR KEY
button again and press DVE to turn off the Fly Key.
2.
Press the
KEY
X
SEL
button for the key you are
setting up. Click DVE and click On .
3. Use the X Pos , Y Pos , and Size knobs to
position and size the key. You can also use the
positioner. Use the X-Position , Y-Position , and
Size sliders in the Positioning area to position
and size the key.
4. Press NEXT .
5. Use the Aspect knob to adjust the aspect ratio of
the key. Use the Aspect slider to adjust the aspect
ration of the key.
6.
Use the Border knob to apply a border to the key.
Use the Size and Softness sliders in the Border
area to apply a border to the key.
Refer to the section
To Apply a Border to a DVE
Key
on page 36 for information on borders.
7. Press NEXT .
8. Crop the key horizontally as follows:
a) Use the HCrop knob to crop the key
horizontally on both the left and right sides at
the same time.
b) Press HCrop and use the Left/R knob to crop
the key horizontally on the left side only.
c) Press Left/R and use the L/Rgt knob to crop
the key horizontally on the right side only.
9. Use the Left and Right sliders to crop the left and
right sides of the key.
10. Crop the key vertically as follows:
a) Use the VCrop knob to crop the key
vertically on both the top and bottom sides at
the same time.
b) Press VCrop and use the Top/B knob to crop
the key vertically on the top side only.
c) Press Top/B and use the T/Bttm knob to crop
the key vertically on the bottom side only.
11. Use the Left and Right sliders to crop the left and
right sides of the key.
12. Crop the key vertically as follows:
a) Use the VCrop knob to crop the key
vertically on both the top and bottom sides at
the same time.
b) Press VCrop and use the Top/B knob to crop
the key vertically on the top side only.
c) Press Top/B and use the T/Bttm knob to crop
the key vertically on the bottom side only.
13. Use the Top and Bottom sliders to crop the upper
and lower sides of the key.
14. Use the Mask knob to apply a mask to the key.
Click
Mask
to apply a mask to the key.
To Apply a Border to a DVE Key
1. Select the keyer that you want to set up a DVE
key border on. Click Navigation Menu > Live
Assist > ME and select the ME and key that you
want to set up.
Tip: You can use the same procedure for a MiniME
™
.
2. Select the video signal, on the key bus, that you
want to use for the key. Click Key Fill and select
the video signal you want to use for the key.
3.
Press DVE . Click DVE .
4. Use the Border knob to turn on the border and
adjust the size of the border around the key. Use
the Size slider in the Border area to turn on the
border and adjust the size of the border around the
key.
5. Use the Soft knob to adjust the softness of the
border. Use the Softness slider to adjust the
softness of the border.
6. Press NEXT .
36 • Keying — Carbonite Black Operation Manual (v14.0)