manualshive.com logo in svg

Ross Carbonite Black Series, Руководство по эксплуатации, Страница: 3 / 64

Поделиться
Скачать
Ross Carbonite Black Series Скачать руководство пользователя страница 3

Document Information

• Ross Part Number: 

 4804DR-110-14.0A

• Release Date: January, 2020. Printed in Canada
• Equipment: This document applies to all Carbonite

Black frames and control panels.

Copyright

©

2020 Ross Video Limited, Ross

®

, MiniME

™

, and any

related marks are trademarks or registered trademarks

of Ross Video Limited. All other trademarks are the

property of their respective companies. PATENTS

ISSUED and PENDING. All rights reserved. No part

of this publication may be reproduced, stored in a

retrieval system, or transmitted in any form or by

any means, mechanical, photocopying, recording or

otherwise, without the prior written permission of Ross

Video. While every precaution has been taken in the

preparation of this document, Ross Video assumes no

responsibility for errors or omissions. Neither is any

liability assumed for damages resulting from the use of

the information contained herein.
Microsoft

®

, Windows

®

, and Windows XP

®

 are either

registered trademarks or trademarks of Microsoft

Corporation in the United States and/or other countries.
Macintosh

®

, and OS X

®

 are trademarks of Apple Inc.,

registered in the U.S. and other countries.
Google Chrome

™

, Google

®

, and the Google logo are

registered trademarks of Google Inc.

Patents

Patent numbers US 7,034,886; US 7,508,455; US

7,602,446; US 7,802,802 B2; US 7,834,886; US

7,914,332; US 8,307,284; US 8,407,374 B2; US

8,499,019 B2; US 8,519,949 B2; US 8,743,292 B2; US

D752,530 S; GB 2,419,119 B; GB 2,447,380 B; and

other patents pending.

Important Regulatory and Safety

Notices to Service Personnel

Before using this product and any associated

equipment, refer to the  “ 

Important Safety

Instructions

 ”  listed in the front of your 

Setup

Manual

 to avoid personnel injury and to prevent

product damage.

Warranty and Repair Policy

Ross Video Limited (Ross) warrants its switchers

and related options, to be free from defects under

normal use and service for a period of ONE YEAR

from the date of shipment. Fader handle assemblies

are warranted for the life of the product. If an item

becomes defective within the warranty period Ross

will repair or replace the defective item, as determined

solely by Ross.
Warranty repairs will be conducted at Ross, with all

shipping FOB Ross dock. If repairs are conducted

at the customer site, reasonable out-of-pocket

charges will apply. At the discretion of Ross, and

on a temporary loan basis, plug in circuit boards

or other replacement parts may be supplied free of

charge while defective items undergo repair. Return

packing, shipping, and special handling costs are the

responsibility of the customer.
Software upgrades for switchers may occur from

time to time, and are determined by Ross Video. The

upgrades are posted on the Ross Video website, and are

free of charge for the life of the switcher.
This warranty is void if products are subjected to

misuse, neglect, accident, improper installation or

application, or unauthorized modification.
In no event shall Ross Video Limited be liable for

direct, indirect, special, incidental, or consequential

damages (including loss of profit). Implied warranties,

including that of merchantability and fitness for a

particular purpose, are expressly limited to the duration

of this warranty.
This warranty is TRANSFERABLE to subsequent

owners, subject to Ross Video's notification of change

of ownership.

Environmental Information

Waste Electrical and Electronic Equipment

Directive (WEEE Directive)

The equipment that you purchased required the

extraction and use of natural resources for its

production. It may contain hazardous substances

that could impact health and the environment.

To avoid the potential release of those substances

into the environment and to diminish the need for the

extraction of natural resources, Ross Video encourages

you to use the appropriate take-back systems. These

systems will reuse or recycle most of the materials

from your end-of-life equipment in an environmentally

friendly and health conscious manner.
The crossed-out wheeled bin symbol invites you to use

these systems.

Carbonite Black Operation Manual (v14.0) — Document Information • 

iii

Содержание Carbonite Black Series

































































Отзывы:

Нет отзывов