Ross Carbonite Black Series, Руководство по эксплуатации, Страница: 38 / 64

4. Click the Key Fill or Key Alpha button and
select the new source for the key.
•
Key Fill — select a different source for the
key. This will change the alpha selection as
well.
• Key Alpha
— select a different alpha for the
key. Selecting the different alpha creates the
split key.
Key Copy
You can copy the entire contents of a keyer to another
keyer. The entire contents of the destination keyer are
replaced with the contents of the source keyer.
When you copy a key, the switcher tries to assign
resources to the destination key to match the source
key. If these resources are not available, the switcher
steals resources in the following order.
1. From off-air keys that are not the source key.
2. From the source key, if it is not on-air.
3. From on-air keys that are not the source key.
4. From the source key, even if it is on-air.
To Copy a Key
This procedure copies the contents of Key 1 to Key
3 as an example. Use the same procedure for any key
combination.
1. Press and hold the KEY 3 SEL button.
This is the destination keyer that you want to copy
to.
2.
Press the KEY 1 SEL button.
This is the source keyer that you want to copy
from.
Key Swap
You can swap the entire contents of any two keyers.
The video source, position, and key type are all
swapped between keyers. This allows you to change
the apparent key priority, or layering, of the keys in
the video output. For example, key 3 appears over key
2. If you perform a swap between key 3 and key 2, it
appears as if key 2 is now over key 3.
Keep the following in mind when performing a key
swap:
• Key swap does not change the on-air status of a
keyer.
• A key swap can be recorded as part of a custom
control.
To Perform a Key Swap
This procedure swaps the contents of Key 2 and Key
3 as an example. Use the same procedure for any key
combination.
1. Press and hold the KEY 2 SEL button.
2. Press the KEY 3 button in the next transition area.
38 • Keying — Carbonite Black Operation Manual (v14.0)