Ross Carbonite Black Series, Руководство по эксплуатации, Страница: 39 / 64

Memory Functions
A memory register is a snapshot of the current state
of the switcher that can include the ME, MiniME ™ ,
or chroma keys. Up to 100 memory registers per ME,
MiniME ™ , or chroma key can be stored and recalled
on the switcher. Each of these memory registers can
store as little as the information of the ME, or as much
as the current state of the entire switcher, including
all MiniME ™ , chroma keys, Aux Buses, and DVE
settings.
Memory Access Mode
Switcher memories can be accessed either through
Direct Access or Bank mode.
• Direct Access — enter the bank and memory
number to store or recall a memory
• Bank — enter the memory number to store or
recall a memory (the bank is locked)
To Set the Memory Access Mode
The memory access mode applies to both memory
storing and recalling.
1. Press STORE .
2.
Use the
Mode
knob to select the memory access
mode you want to use.
Storing Memories
When you store a memory, you are storing the
complete state of that panel row. This includes the
current state of all the areas on the ME, including
keyer settings, transition rates, wipe selections, and
source selections. In addition to the current state of the
panel, the current settings for the various keyers, such
as chroma key settings, and clip and gain settings, are
also stored.
Tip: Double-press the STORE button to lock the memory
system in store mode. The menu system remains in store
mode until you press RECALL .
To Store a Memory
Note: This procedure only applies to the CB1 and CB2.
To store a memory, you must select which ME,
MiniME ™ , or chroma key to store the memory for, and
then use the mnemonic buttons to select the bank and
register to store the memory in.
1. Press and hold STORE and select the source
buttons on the key bus to select where you want to
store the memory for.
•
1 — ME 1
• 4
— MiniME ™ 1
• 5 — MiniME
™
2
• 6 — chroma key 1
•
7 — chroma key 2
2.
Use the numbers on the mnemonic buttons to
select the bank and register you want to store the
memory to.
Tip: The button will be lit if that memory register already
has a memory stored in it.
The memory has been stored to the selected memory
register.
Related information
Memory Access Mode
on page 39
To Store a Memory on the Effects Memory
Area
Note: This procedure does not apply to the CB1 and CB2.
1.
Press Store in the Effects Memory area for the
ME you want to store the memory to.
2. Select the recall mode that you want to store with
the memory. Toggle the button on (lit) to have it
stored with the memory.
•
PGM — selects the PGM recall mode
• MEM AI
— selects the Memory AI recall
mode
• EFF DISS — selects the Effects Dissolve
recall mode
3. Press BANK .
4. Press the number for the bank you want to select.
5.
Press the number for the memory register you
want to select.
Tip: The button will be lit if that memory register already
has a memory stored in it.
The memory is stored in the selected location.
To Store a Memory on the Global Memory
Area
Note: This procedure does not apply to the CB1 and CB2.
1.
Press STORE next to the display.
2. Select the ME or MiniME
™
s that you want to store
the memory for.
Carbonite Black Operation Manual (v14.0) — Memory Functions • 39