Ross Carbonite Black Series, Руководство по эксплуатации, Страница: 10 / 64

non-full screen images like logos are loaded from
USB.
MediaManager
The MediaManager allows you to easily manage stills
and animations on the switcher in a graphics interface.
MediaWipe
A MediaWipe allows you to use an animation
from the Media-Store to play over a background
or key transition. When the transition starts, the
switcher plays the selected animation over top of the
background and keys that are being transitioned. A cut,
dissolve, wipe, or DVE wipe is then performed layered
under the animation to bring up the next shot when the
animation ends.
MemoryAI Recall Mode
We take the guessing out of memory recalls by
ensuring that a memory recall will not affect what is
currently on-air. MemoryAI uses the content of the
memory to configure the Next Transition area and
Preview bus for the background and keyers so that the
next transition takes the same sources on-air that were
on-air in the memory.
For example, store a memory that has a key on-air with
CAM1 and CAM2 selected on the background. When
this memory is recalled normally, it pops the same
key on-air with CAM1 and CAM2 on the background.
When the memory is recalled with MemoryAI turned
on, CAM1 is selected on the preset bus, and CAM2
is selected on a key that is not on-air. The transition
area is then set up for a background transition to bring
CAM2 onto the background, take any on-air keys off,
and take a key on-air with CAM1.
Memory System
Storage for 100 complete switcher snapshots per ME,
MiniME ™ , and chroma key comes standard with all
switchers. All of these memories can be stored to a
USB media drive, providing custom tailored memories
for every operator and every show.
MiniME
™
The MiniME
™
is an additional ME that is provided
with the switcher to perform basic dissolves and cuts.
Each MiniME
™
has 2 keyers, background, and preset
buses. Unlike a full ME, the MiniME
™
only supports
dissolves and cuts. The MiniME
™
shares all the same
sources as the ME.
MultiViewer
Each MultiViewer allows you to view up to 16 video
sources, in 45 different layouts, from a single output
BNC. Any video source on the switcher, including ME
Program, Preview, and Media-Store channels, can be
routed to any box on the MultiViewer. All boxes on the
MultiViewer output include mnemonic source names
and red and green tallies.
The Carbonite Black comes standard with 1 broadcast-
quality integrated MultiViewer generator and the
Carbonite Black+/Carbonite Black+ 12G come
standard with 4. The additional MultiViewer outputs
on the Carbonite Black+/Carbonite Black+ 12G are
only available on dedicated output BNCs and only
support 10 boxes. Each of these MultiViewer outputs
has a specific range of input and output BNCs that can
be assigned to boxes on the MultiViewer.
Figure 1: HD Layouts
10 • Features — Carbonite Black Operation Manual (v14.0)