Ross Carbonite Black Series, Руководство по эксплуатации, Страница: 18 / 64

DashBoard
The DashBoard control system allows remote access
to multiple pieces of Ross Video equipment, including
openGear ® cards, Carbonite production switchers,
BlackStorm video servers, and ACID UltraChromeHR
cameras.
Download and install the latest version of DashBoard
from http://www.opengear.tv/ . Review the
documentation that comes with DashBoard for
information on installing and launching DashBoard.
Note: Carbonite requires DashBoard v8.0, or higher.
Tip:
For detailed instructions on using DashBoard with
Carbonite, navigate to the online help at help.rossvideo.com/
carbonite .
Status
The Status node provides a read only overview of the
state of a number of important switcher components
and equipment.
The following items are available on the
Status
node:
•
Software Version
— the current version of the
software running on the switcher
• Serial Number — the serial number of the frame
• Engine Type — the model of frame
• Video Mode — the video format that the switcher
is operating in
•
Video Reference Source
— the source of video
reference to the switcher
• External Reference — the video format of the
external reference, if connected
• Reference — status of whether the switcher has
locked to the reference format
• Ancillary Mode — how ancillary data is handled
(strip or pass)
•
Temperature
— status of the ambient temperature
in the frame
• CPU Temperature (C) — the temperature of the
frame CPU in degrees Celsius
• FPGA Temperature (C) — the temperature of the
frame FPGA in degrees Celsius
• I/O FPGA X Temperature (C) — the temperature
of each of the video processing FPGAs in degrees
Celsius
•
Fan #1
— status of fan 1 in the frame (left fan)
• Fan #2 — status of fan 2 in the frame (right fan)
• Timecode — the current timecode being received
by the switcher
• RossTalk Server Port — the network port that the
switcher is listening on for RossTalk commands.
• TSL UMD Server Port — the network port
that the switcher is listening on for TSL UMD
commands.
• Allocated DVEs — where DVE channels are
allocated in the switcher.
Configuration
The Configuration node provides a graphical interface
to switcher settings such as Reference, Inputs, Outputs,
and MultiViewer. You can switch between the different
by selecting the tabs at the bottom of the DashBoard
window.
Live Assist
The Live Assist node provides a graphical interface
to functions such as keying, transition, and memory
settings of the switcher. You can switch between the
different settings by selecting the tabs at the bottom of
the DashBoard window.
PaneLINK
Live Assist can be set to either mirror actions on the
switcher control panel, or only show actions on the
currently selected ME and Keyer on the current tab.
For example, with PaneLINK turned on, pressing
KEY 1 SEL , WIPE , and then SELF KEY causes Live
Assist to show the Keyers tab, the Trans tab, and then
the Keyers tab again. With PaneLINK turned off,
Live Assist does not switch between tabs.
The
PaneLINK button is located at the bottom right
corner of the Live Assist window.
Custom Controls
The Custom Control node provides a graphics
interface for recording, editing, and running custom
controls.
MediaManager
The MediaManager node allows you to connect to the
MediaManager web interface from within DashBoard.
Tip:
You can either launch the MediaManager directly using
the switcher IP address, or you can access it using the
MediaManager node in DashBoard. If you are logging into
MediaManager from DashBoard, you must have Microsoft
®
Internet Explorer
®
10, or higher, installed.
18 • DashBoard — Carbonite Black Operation Manual (v14.0)