Remote Control Commands
R&S
®
NRPxxTWG
47
User Manual 1178.8371.02 ─ 04
7.5.4.1
Continuous Average Mode
General settings for these examples:
●
ON
●
4
●
[SENSe<Sensor>:]AVERage:COUNt:AUTO
OFF
Example: Repeating termination control
Further settings for this example:
●
[SENSe<Sensor>:]AVERage:TCONtrol
REPeat
The measurement is started by the trigger event. Due to the chopper phases, one
measurement lasts twice the defined aperture time. As defined by the average count,
after 4 measurements, the result is averaged and available. During the whole mea-
surement cycle, the trigger synchronization is high (
ON
).
5
t
AP
2
1
3
4
7
8
6
1 = Start of the measurement cycle
2 = Trigger event
3 = Noninverted chopper phase
4 = Inverted chopper phase
5 = Duration of one aperture time (1 x t
AP
)
≙
length of one chopper phase
6 = Measurement result
7 = Trigger synchronization
8 = Return to the start of the measurement cycle
Controlling the Measurement
