Rohde & Schwarz EX-IQ-BOX, Руководство пользователя

Страница: 98 / 418

R&S EX-IQ-BOX Configuration
R&S
®
EX-IQ-BOX
83 User Manual 1409.5570.32 ─ 05
Possible remote control configurations are:
●
Controller and R&S DigIConf installed on the same PC
Controller R&S DigIConf R&S EX-IQ-BOX USB
PC
localhost
●
Controller and R&S DigIConf running on separate PCs:
Controller R&S DigIConf R&S EX-IQ-BOX USB
PC#2
LAN
PC#1
Refer to
​
chapter 8.1.3, "Starting a Remote Control Session" , on page 215 for information
on how to get started and how to establish a remote control connection between the
controller and the software.
The remote control mode controls R&S DigIConf with commands following the SCPI
( S tandard C ommands for P rogrammable I nstruments) standard.
Find a detailed description of the SCPI commands available for R&S DigIConf in
​
chap-
ter 9, "Remote Control Commands" , on page 236. The remote control commands related
to the transmission protocols are described in detail after each functional unit.
For background information on the SCPI command structure and basic information on
operating the R&S
DigIConf software via remote control, refer to
​
chapter 8, "Remote
Control Basics" , on page 213.
6.2 Configuration via R&S Instruments
This chapter describes how you configure the R&S EX-IQ-BOX directly in a R&S instru-
ment. It explains connection, indication and data transmission separately for each instru-
ment family.
● ​
chapter 6.2.1, "R&S Signal Generators" , on page 84 contains general information
on the connection and operation with the R&S signal generators, the block diagram
and the configuration dialogs.
● ​
chapter 6.2.2, "R&S Signal Analyzers" , on page 89 contains general information on
connection and operation with R&S signal analyzers and shows the display and con-
figuration dialogs.
● ​
chapter 6.2.3, "R&S Protocol Tester" , on page 94 always control the R&S EX-IQ-
BOX via R&S DigIConf. Therefore, this chapter contains references to the relevant
information.
Configuration via R&S Instruments