Remote Control Commands
R&S
®
EX-IQ-BOX
326
User Manual 1409.5570.32 ─ 05
[:SOURce<hw>]:EBOX:CPRI:TEST:RX:LOS?
The command queries a
L
oss
o
f
S
ignal (LOS).
Return values:
<Los>
0 | 1
*RST:
0
Example:
SOUR1:EBOX:CPRI:TEST:RX:LOS?
check if loss of signal happened.
Response:
0
(no error)
Usage:
Query only
Manual operation:
See
[:SOURce<hw>]:EBOX:CPRI:TEST:RX:RAI?
The command queries the RAI (
R
emote
A
rm
I
ndication) state, i.e. if any remote part of
the end-to-end link has failed.
Return values:
<Rai>
0 | 1
*RST:
0
Example:
SOUR1:EBOX:CPRI:TEST:RX:RAI?
check if a remote part of the end-to-end link has failed.
Response:
0
if OK,
1
if not OK
Usage:
Query only
Manual operation:
See
[:SOURce<hw>]:EBOX:CPRI:TEST:RX:RESet?
Checks the reset state of the DUT.
Return values:
<Reset>
0 | 1
1
CPRI RE test mode: Confirms that a reset was performed.
CPRI REC test mode:
Confirms a reset request.
0
CPRI RE test mode:
No reset was performed.
CPRI REC test mode:
No reset is requested.
*RST:
0
Example:
SOUR1:EBOX:CPRI:TEST:RX:RES?
check the reset state of the DUT.
Usage:
Query only
Manual operation:
See
CPRI Remote Control Commands
Содержание EX-IQ-BOX
Страница 147: ...Protocol Settings R S EX IQ BOX 132 User Manual 1409 5570 32 05 CPRI...
Страница 391: ......
