Rohde & Schwarz EX-IQ-BOX, Руководство пользователя

Страница: 226 / 418

Protocol Settings
R&S
®
EX-IQ-BOX
211 User Manual 1409.5570.32 ─ 05
Record
Starts the recording.
Remote command:
​
[:
​
SOURce<hw>]:
​
EBOX:
​
CPRI:
​
RECorder<ch>:
​
EXECute
​
on page 318
Abort / Discard
Stops and cancels the recording. You can abort the recording process at any time.
After recording "Record Done", the ABORT button label changes to DISCARD.
Note: Avoid data loss!. Discard erases the recorder memory. In order to keep the data,
save it first by pressing TARGET FILE....
DISCARD changes the recording status from "Record Done" back to "Idle" and is ready
for a new recording.
Remote command:
​
[:
​
SOURce<hw>]:
​
EBOX:
​
CPRI:
​
RECorder<ch>:
​
ABORt
​
on page 317
Save to File
Save the data in a file.
Note: CPRI stores the recorded data in the R&S WinIQSim2 waveform file format with
the predefined file extension
*.wv
. By default, waveform files are stored in the directory
%Program Files%/Rohde-Schwarz/DigIConf/Settings , unless another directory is
selected. File name and the directory are user-selectable.
Remote command:
​
[:
​
SOURce<hw>]:
​
EBOX:
​
CPRI:
​
RECorder<ch>:
​
FILE:
​
CREate
​
on page 318
Save
Open a file dialog to select directory and file name for storing the recorded data.
Fig. 7-81: CPRI Recorder > File dialog
The "Recent Files" directory shows the files last used. Select the directory where recorded
files are stored. The available files, identifiable by the file extension *.wv are shown. The
"Select" button loads the marked file and returns to the "Recorder" settings dialog.
CPRI