Rohde & Schwarz EX-IQ-BOX, Руководство пользователя

Страница: 33 / 418

System Overview
R&S
®
EX-IQ-BOX
18 User Manual 1409.5570.32 ─ 05
R&S EX-IQ-BOX
USB
Control
R&S DigIConf
ipaddr, port
Remote control
program
LAN
Remote
ipaddr
port
Fig. 3-5: Remote control program and R&S DigIConf running on different PCs
The LAN connection is established to the computer with R&S DigIConf with a commercial
RJ-45 network cable. IP address and port are assigned accordingly.
For further information on LAN connection and IP address, see
​
chapter 8, "Remote Con-
trol Basics" , on page 213.
3.1.3.2 Remote Control via an R&S Instrument
This operating mode applies to the R&S EX-IQ-BOX 1409.5502.02 and User Defined
protocols.
The R&S
EX-IQ-BOX 1409.5505K04 is always controlled by R&S DigIConf.
If the R&S EX-IQ-BOX 1409.5502.02 works directly with an R&S instrument, i.e. without
R&S DigIConf, the box is accessed by the instrument via the USB interface. Remote
control is executed via the instrument, i.e. all remote control interfaces of the instrument
can be usesd, as well as all remote-control modes.
R&S instruments usually provide remote control via LAN, GPIB, or USB interface. Refer
to the operating manual of your instrument to receive detailed information on the available
remote control interfaces and their use.
See the operating manual of your R&S instrument for detailed information:
●
For setting up a connection, refer to sections "Connecting the Instrument to a Net-
work", and "Manual Remote Control via an External Controller" in chapter "Putting
into Operation".
●
Chapter "Remote Control - Basics" describes the basics for setting up the instrument
for remote control, programming syntax, command processing and the status report-
ing system.
●
Chapter "Remote Control - Description of Commands" lists all the remote commands
that are defined for the instrument.
Basic Operating Modes