Rohde & Schwarz EX-IQ-BOX, Руководство пользователя

Страница: 231 / 418

Remote Control Basics
R&S
®
EX-IQ-BOX
216 User Manual 1409.5570.32 ─ 05
The software is in a remote control state as soon as it receives a command from the
controller.
8.1.5 Examples
These sections provides examples for setting up of remote control connection and start-
ing a remote control session over LAN interface.
This section assumes basic knowledge of programming and operation of the controller.
A description of the interface commands can be obtained from the relevant manuals.
8.1.5.1 Remote Control Over LAN Using Socket Protocol
Through the examples in this section, the program 'Measurement & Automation Explorer'
from National Instruments under Windows operating system is used for setting up a LAN
remote control link and starting a remote control session.
Configuring the controller
To enable the external controller to communicate with the software via TCP/IP protocol,
set up a remote control link as follow:
1. Connect the controller and the instrument to the network (network cable) and switch
them on.
2. Start the 'Measurement & Automation Control' program on the controller.
3. Select "Devices and Interfaces > Create New".
4. Select "VISA TCP/IP Resource" and confirm with "Next".
Remote Control Interfaces and Protocols