Remote Control Commands
R&S
®
EX-IQ-BOX
269
User Manual 1409.5570.32 ─ 05
[:SOURce<hw>]:EBOX:USER:CLOCk:REFerence:FREQuency
<Frequency>
Note:
This command applies to R&S
DigIConf and is relevant for the internal clock
source.
Defines the frequency value of the reference clock.
The R&S
EX-IQ-BOX supports different reference frequencies to be input at REF IN. This
value must be set on the frequency currently supplied.
Parameters:
<Frequency>
5MHZ | 10MHZ | 13MHZ
*RST:
10 MHz
Example:
SOUR1:EBOX:USER:CLOC:RATE 13MHZ
set the reference frequency to "13 MHz":
Manual operation:
See
[:SOURce<hw>]:EBOX:USER:CLOCk:REFerence:VALue?
Queries the value of the clock signal at REF IN.
Return values:
<RefVal>
float
Example:
SOUR1:EBOX:USER:CLOC:REF:VAL?
query the clock value.
Usage:
Query only
Manual operation:
See
[:SOURce]:BBIN:EXTernal:CLOCk:SKEW:IN
<SkewIn>
[:SOURce<hw>]:IQ:OUTPut:EXTernal:CLOCk:SKEW:IN
<SkewIn>
SOURce:TRANsmitter:CLOCk:SKEW:IN
<SkewIn>
SOURce:RECeiver:CLOCk:SKEW:IN
<SkewIn>
[:SOURce<hw>]:EBOX:USER:CLOCk:SKEW:IN
<SkewIn>
Sets a time shift of the active clock edge related to the data bits. This feature is used to
compensate an internal clock skew which is caused by differences of the clock and data
line lengths.
Parameters:
<SkewIn>
float
Range:
-100.0 ns to 100.0 ns
*RST:
0 ns
Example:
SOUR1:EBOX:USER:CLOC:SKEW:IN 2ns
sets a time shift of 2 ns.
Manual operation:
See
User Defined - Remote Control Commands
Содержание EX-IQ-BOX
Страница 147: ...Protocol Settings R S EX IQ BOX 132 User Manual 1409 5570 32 05 CPRI...
Страница 391: ......
