Rohde & Schwarz EX-IQ-BOX, Руководство пользователя

Страница: 42 / 418

Getting Started
R&S
®
EX-IQ-BOX
27 User Manual 1409.5570.32 ─ 05
Risk of injury and instrument damage if stacking instruments
A stack of instruments may tilt over and cause injury and material damage because the
instrument's top surface area is too small.
Never stack instruments on top of each other. If you need to stack instruments, install
them in a rack.
Protection against Connector Overload
Avoid connector overload
The type of the electrical signals are based on various logic types (TTL or CMOS stand-
ard) performing different logic levels. The logic type of the connected DUT must be com-
patible to the set logic type of the R&S
EX-IQ-BOX. Inappropriate logic types may cause
damage to the R&S EX-IQ-BOX or to the DUT.
Make sure that the signal level is compatible to the set logic type and does not exceed
the permissible limits.
Follow the allowed maximum values, listed in the data sheet!
As soon as a protocol is activated or the logic type is changed during the operation, the
following warning message appears:
The setting is executed only after confirmation of the warning message.
Safety Instructions