Rohde & Schwarz EX-IQ-BOX, Руководство пользователя

Страница: 212 / 418

Protocol Settings
R&S
®
EX-IQ-BOX
197 User Manual 1409.5570.32 ─ 05
Frames Received
Indicates the number of received HDLC frames.
Remote command:
​
[:
​
SOURce<hw>]:
​
EBOX:
​
CPRI:
​
CM:
​
HDLC:
​
RFRames?
​
on page 295
Terminal
The "Terminal" section contains an entry field for control commands, an EXECUTE but-
ton to process the entered commands or the command sequences, and a CLEAR button
for reset.
Note: You can execute this command only, if the number of symbols is divisible by 2.
Odd values ​​are not accepted.
Remote command:
​
[:
​
SOURce<hw>]:
​
EBOX:
​
CPRI:
​
CM:
​
HDLC:
​
COMMand
​
on page 294
​
[:
​
SOURce<hw>]:
​
EBOX:
​
CPRI:
​
CM:
​
HDLC:
​
EXECute
​
on page 295
​
[:
​
SOURce<hw>]:
​
EBOX:
​
CPRI:
​
CM:
​
HDLC:
​
RX?
​
on page 296
​
[:
​
SOURce<hw>]:
​
EBOX:
​
CPRI:
​
CM:
​
HDLC:
​
RST
​
on page 296
RS232 Settings
This section contains information on the RS232 interface, as:
"Data Bits" number of information units.
"Stop Bits" number of stop bits.
"Parity" even or odd number of set bits in the binary representation.
"Baudrate" number of bits that are transmitted per second.
Remote command:
​
[:
​
SOURce<hw>]:
​
EBOX:
​
CPRI:
​
CM:
​
HDLC:
​
BAUDrate
​
on page 291
7.2.10.2 Fast C&M (Ethernet)
The Ethernet Settings section comprises the necessary parameters for activating fast
control and management data exchange via the Ethernet interface.
In chapter
​
chapter 4.5, "Connecting the R&S EX-IQ-BOX" , on page 42, you find infor-
mation on how to connect the interface. For more information on the hardware, see the
data sheet of the R&S
EX-IQ-BOX, option R&S EXBOX-B85 (CPRI breakout board).
CPRI