Remote Control Commands
R&S
®
EX-IQ-BOX
270
User Manual 1409.5570.32 ─ 05
[:SOURce]:BBIN:EXTernal:CLOCk:SKEW:OUT
<Skew>
[:SOURce<hw>]:IQ:OUTPut:EXTernal:CLOCk:SKEW:OUT
<Skew>
SOURce:TRANsmitter:CLOCk:SKEW:OUT
<Skew>
SOURce:RECeiver:CLOCk:SKEW:OUT
<Skew>
[:SOURce<hw>]:EBOX:USER:CLOCk:SKEW:OUT
<Skew>
Sets a time shift of the active clock edge related to the data bits. This feature is used to
compensate an external clock skew which is caused by differences of the clock and data
line lengths.
Parameters:
<Skew>
float
Range:
-5 ns to 5 ns
*RST:
0 ns
Example:
SOUR1:EBOX:USER:CLOC:SKEW:OUT 2ns
sets a time shift of 2 ns.
Manual operation:
See
[:SOURce]:BBIN:EXTernal:CLOCk:SOURce
<Source>
[:SOURce<hw>]:IQ:OUTPut:EXTernal:CLOCk:SOURce
<Source>
SOURce:TRANsmitter:CLOCk:SOURce
<Source>
SOURce:RECeiver:CLOCk:SOURce
<Source>
[:SOURce<hw>]:EBOX:USER:CLOCk:SOURce
<Source>
Selects the clock source for data transmission. Either the R&S instrument or the external
device (DUT) can deliver the reference, irrespective of the transmission path.
Parameters:
<Source>
INTernal | EXTernal | REF
INTernal
The BNC reference of the frequency input is used. The R&S
EX-
IQ-BOX synthesizes the clock and forwards it to the external
device.
Note:
When using the internal clock frequency, the reference out-
put of the R&S instrument must be connected to the REF IN of the
R&S
EX-IQ-BOX at the rear panel. The connection can be kept
during the entire operation even if an external clock reference is
used.
EXTernal
The clock reference is fed in from the external device (DUT) to the
user interface of the R&S
EX-IQ-BOX.
*RST:
REF
Example:
SOUR1:EBOX:USER:CLOC:SOUR EXT
select the "EXTernal" clock source.
Manual operation:
See
User Defined - Remote Control Commands
Содержание EX-IQ-BOX
Страница 147: ...Protocol Settings R S EX IQ BOX 132 User Manual 1409 5570 32 05 CPRI...
Страница 391: ......
