Rohde & Schwarz EX-IQ-BOX, Руководство пользователя

Страница: 115 / 418

Protocol Settings
R&S
®
EX-IQ-BOX
100 User Manual 1409.5570.32 ─ 05
The transmission is activated by switching on the "State" button.
"Transmitter"
The connected R&S EX-IQ-BOX receives data from an R&S instrument
and transmits this data to the DUT.
In conjunction with analyzers the setup of the box must be initiated by
the user. To do this the user must press "SEND TO" hotkey or send the
following remote command to the analyzer:
"Receiver" The connected R&S EX-IQ-BOX receives data from the DUT and trans-
mits this data to an R&S instrument.
Remote command:
R&S
DigIConf, R&S signal generators:
​
[:
​
SOURce<hw>]:
​
EBOX:
​
USER:
​
DIRection
​
on page 258
R&S signal analyzers:
​
SOURce:
​
TRANsmitter:
​
SENDto
​
on page 260
​
[:
​
SOURce]:
​
RECeiver:
​
SENDto
​
on page 260
Set To Default
Executes a default application setup.
The function, provided by R&S DigIConf presets all parameters and switching states, also
those of inactive operating modes. The default application settings provide a reproducible
initial basis for all other settings.
Remote command:
​
[:
​
SOURce<hw>]:
​
EBOX:
​
USER:
​
PRESet
​
on page 260
Save/Recall
Store the current application settings in the specified path, or load the selected file. Save
provides to store the current application settings of R&S
DigIConf in a file. Recall opens
previously stored settings files.
Note: A settings file is always stored, or loaded with the extension
*.iqbox
. This file
type cannot be changed.
Remote command:
​
[:
​
SOURce<hw>]:
​
EBOX:
​
USER:
​
SETTing:
​
STORe
​
on page 262
​
[:
​
SOURce<hw>]:
​
EBOX:
​
USER:
​
SETTing:
​
LOAD
​
on page 262
7.1.3 Protocol
The "Protocol" tab contains the interface parameters for signal transmission from the DUT
to the R&S
EX-IQ-BOX and vice versa. To the overview R&S DigIConf also shows the
"Clock" and "Data" settings and the signal flow in a diagram.
User Defined