Protocol Settings
R&S
®
EX-IQ-BOX
114
User Manual 1409.5570.32 ─ 05
"Positive"
Example:
Sets the strobe polarity to high level.
Fig. 7-27: User defined > Strobe polarity positive: I/Q OUT serial
word size
= 4
bit order
= LSB
numeric format = 2's complement
strobe polarity = positive
"Negative"
Sets the strobe polarity to low level.
Example:
Fig. 7-28: User defined > Strobe polarity negative: I/Q OUT serial
word size
= 4
bit order
= LSB
numeric format = 2's complement
strobe polarity = negative
Remote command:
Strobe Position
Sets the sample position of the strobe marker output.
Note:
●
This parameter applies to serial data transmission.
●
Value range: 0 to word size -1.
●
The graphic in the clock dialog of the generators and in R&S
DigIConf shows the
presently set sample position.
●
The strobe marker is output at the UI_GP5 of the user interface.
User Defined
Содержание EX-IQ-BOX
Страница 147: ...Protocol Settings R S EX IQ BOX 132 User Manual 1409 5570 32 05 CPRI...
Страница 391: ......
