TOPEX Bytton (HSPA+ / LTE)
ByttonLTE(full)_genericUsermanual_sw306FAS_revN.1.docx
Page: 230 / 290
5.6 SERVICES
Here you may configure settings for the “services” provided by Bytton LTE, such as VRRP, SNMP, Telnet,
configuration and activation of serial ports, control via SMS, Dynamic DNS, Client for NTP, and finally the
function of the RST button:
Figure 5-179: SERVICES – configuration web page for “services”.
Depending upon different factors, all of the “services” features may be available to you, or only the most
basic ones, which are to be found in any software version, such as SNMP, DDNS, NTP and Reset.
.
Figure 5-180: Illustration of different menus for SERVICES.
These “factors” include:
- the actual firmware version or variant, which may contain a lower or higher number of features;
- the hardware equipping of your Bytton device: SERIAL is available only if it is fitted with one or two serial
interfaces, Webcam makes sense only when the device has an active USB slot, and so on.
- the mode of login: a simple user, which logs in as “admin”, has less rights, so he sees only to the basic
features, while the “superuser” may get access also to the advanced features, such as VRRP or Telnet!
Typically, SNMP, SMS, DDNS, NTP and of course “Reset” are available in all versions, while the rest of
the features depend upon the current hardware and firmware configuration of your particular Bytton LTE
equipment.
