TOPEX Bytton (HSPA+ / LTE)
ByttonLTE(full)_genericUsermanual_sw306FAS_revN.1.docx
Page: 19 / 290
2. PACKAGE CONTENT
The component elements that you may identify upon opening the Bytton LTE package are shown
below. When you open the equipment package, please ensure, using this list of items, that you have the
full content.
Component Image
Component Description
Bytton LTE unit in its metallic case. It is a
3G/4G router with embedded firewall an
tunneling solution for wired and/or wireless
local computer networks, which allows
secure, mobile, high-speed access to
Internet using the 3G+ network or other
WAN connections
Power supply: switching mains adapter
Input: 100-240V
A.C
Output: 12V
D.C
. / 2.1A
Power Max. Output : 24 W
Ethernet cable for local network connection
A piece of UTP straight cable, with RJ-45
connectors.
Stick antenna for Wi-Fi
Special antenna for the embedded Access
Point, the connector can be bended at 90
o
or rotated for getting the best signal.
The N-type Wi-Fi may use
dual
antennas.
Antenna, adequate for the mobile module
used on the respective Bytton.
It may be a
quad band stick
for GSM /
HSPA+ with magnetic base and 2,5 m long
cable.
In case of Bytton LTE fitted with 4G
modules, in the package are shipped 1-2
multiband coil antennas especially for LTE
networks.
LTE technology can use dual antennas for
diversity, so
two
antennas will be included
in the Bytton LTE package.
-
CD with User’s Manual
-
Warranty Certificate
Figure 2-1: Illustrations of the content of the package of Bytton ICR
