Rockwell Automation PowerFlex 700S, Руководство пользователя, Страница: 170 / 318

3-112 Programming and Parameters
PowerFlex 700S Phase II AC Drive User Manual - Publication 20D-UM006G-EN-P – July 2008
1108 DelTmr1 TrigData
Link a word to this parameter that will control a user-defined on or off delay timer. The bit
within the selected word that will control the delay timer is set by
Par 1109 [DelTmr1 Trig Bit].
The user-defined on/off delay timer is enabled by setting bit 6 “Delay Timer” of Par 1000
[UserFunct Enable].
Note: This parameter was added for firmware version 3.01.
Default:
Min/Max: 0
32 bits of data
✓
RW 32-bit
Boolean
1109 DelTmr1 Trig Bit
Selects the bit, from the word linked to Par 1108 [DelTmr1 TrigData], that will change the
status of the user-defined delay timer to on or off. When Par 1109 [DelTmr1 Trig Bit] is a
positive number, the delay timer is an “on” timer. When Par 1109 is a negative number, the
delay timer is an “off” timer.
Note: This parameter was added for firmware version 3.01.
Default:
Min/Max: 0
-/+32 RW 16-bit
Integer
1110 DelayTimer1PrSet
The time that the value in Par 1111 [DelayTimer1Accum] must reach before bit 2 “Timer
Done” in Par 1112 [DelayTimer1Stats] is set.
Note: This parameter was added for firmware version 3.01.
Units:
Default:
Min/Max: Sec.
0
0/600.00
✓
RW 16-bit
Integer
1111 DelayTimer1Accum
The amount of time that has elapsed since the timer was enabled ( Par 1112
[DelayTimer1Stats], bit 2 set).
Note: This parameter was added for firmware version 3.01.
Units:
Default:
Min/Max: Sec.
0
0/600.00 RO 16-bit
Integer
1112 DelayTimer1Stats
Displays the status of the user-defined on or off delay timer.
Bit 0 “Timer Enable” when this bit is set, the timer is enabled.
Bit 1 “Timer Timing” when this bit is set, the timer is running.
Bit 2 “Timer Done” when this bit is set, the timer is done.
Note: This parameter was added for firmware version 3.01.
1113 DelTmr2 TrigData
Link a word to this parameter that will control a user-defined on or off delay timer. The bit
within the selected word that will control the delay timer is set by
Par 1114 [DelTmr2 Trig Bit].
The user-defined on/off delay timer is enabled by setting bit 6 “Delay Timer” of Par 1000
[UserFunct Enable].
Note: This parameter was added for firmware version 3.01.
Default:
Min/Max: 0
32 bits of data
✓
RW 32-bit
Boolean
1114 DelTmr2 Trig Bit
Selects the bit, from the word linked to Par 1113 [DelTmr2 TrigData], that will change the
status of the user-defined delay timer to on or off. When Par 1114 [DelTmr2 Trig Bit] is a
positive number, the delay timer is an “on” timer. When Par 1114 is a negative number, the
delay timer is an “off” timer.
Note: This parameter was added for firmware version 3.01.
Default:
Min/Max: 0
-/+32
▲
RW 16-bit
Integer
1115 DelayTimer2PrSet
The time that the value in Par 1116 [DelayTimer2Accum] must reach before bit 2 “Timer
Done” in Par 1117 [DelayTimer2Stats] is set.
Note: This parameter was added for firmware version 3.01.
Units:
Default:
Min/Max: Sec.
0
0/60000
✓
RW 16-bit
Integer
1116 DelayTimer2Accum
The amount of time that has elapsed since the timer was enabled ( Par 1117
[DelayTimer2Stats], bit 1 set).
Note: This parameter was added for firmware version 3.01.
Units:
Default:
Min/Max: Sec.
0
0/60000 RO 16-bit
Integer
No.
Name
Description
Values
Linkab
le
R
ead-Wr
ite
Da
ta
T
ype
Delay
Timer 1
1108
1112 00
DelayTimer1 Data
1110
DelayTimer1PrSet
1111
DelayTimer1Stats
DelayTimer1Accum 1109 DelayTimer 1 Bit
00
00 Enabled
Timing
Done
Options
Reser
ved
Reser
ved
Reser
ved
Reser
ved
Reser
ved
Reser
ved
Reser
ved
Reser
ved
Reser
ved
Reser
ved
Reser
ved
Reser
ved
Reser
ved
Timer Don
e
Timer Timing Timer Ena
ble
Default 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0 = False
1 = True
Delay
Timer 2
1113
1117 00
DelayTimer2 Data
1115
DelayTimer2PrSet
1116
DelayTimer2Stats
DelayTimer 2Accum 1114 DelayTimer2 Bit
00
00 Enabled
Timing
Done