Ridder Aqua CX300, Руководство пользователя

Страница: 21 / 92

Irrigation volume
Irrigation time
Pre-rinse time
Post-rinse time
Main pause time
Number of valve group rep.
Number of valves simultaneously
Minimum flow
Maximum flow
Flow alarm delay
Path: Settings>Programs>Program name>Irrigation
Irrigation volume 0 - 9999 Litres
The volume of irrigation water (in litres) to be supplied by each valve in the valve
group.
Use the 'Valve percentage' setting to enter a percentage of the irrigation
volume that each valve should supply individually.
Irrigation time
The duration that each valve in the valve group will open.
Use the 'Valve percentage' setting to enter a percentage of the irrigation time
that each valve should open individually.
Pre-rinse time
The volume of water (in litres) that each valve will supply, or the number of minutes
that each valve will open in order to rinse the crop prior to nutrient application.
Post-rinse time
The volume of water (in litres) that each valve will supply, or the number of minutes
that each valve will open in order to rinse the crop following nutrient application.
Main pause time
The number of minutes during which the valve group, after having been deactivated,
may not be reactivated automatically. A new irrigation start will be delayed until the
main pause time has elapsed. This setting prevents a new start from being executed
just after the valve group has completed an irrigation cycle.
A manual start is always executed immediately.
Number of repetitions 0 - 999
The number of times that the activation of a valve group will be repeated following its
initial activation.
The main pause time will not be observed between the repetitions.
Aqua CX300
21