Ridder Aqua CX300 Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 92

Ridder Aqua CX300 Скачать руководство пользователя страница 41

Start time of frost prevention sprinkling

The time after which frost prevention sprinkling may start for the first time.

Real time: Fixed time point in time.
Sunrise: time before (-) or after sunrise.
Sunset: time before (-) or after sunset.

End time of frost prevention sprinkling

The time after which frost prevention sprinkling may no longer start for the first time.
If frost prevention sprinkling was already active, it may continue even after the end
time has elapsed.

Real time: Fixed time point in time.
Sunrise: time before (-) or after sunrise.
Sunset: time before (-) or after sunset.

No start will be executed if 00:00:00 (real time) is set for the end time.

Temperature for start frost prevention sprinkling -20 - 100 °C

The function of this setting depends on the option selected for 'Frost prevention
sprinkling':

Active: The outside temperature at which frost prevention sprinkling will start
automatically.
Alarm: The outside temperature at which an alarm will be triggered. Once an
alarm has been triggered, no new alarm messages will follow, unless you
adjust the value set for 'Outside temperature for start frost prevention
sprinkling'.

Temperature zone for stop frost prevention sprinkling 0 - 100 °C

The number of degrees Celsius that the outside temperature must rise above the
'Temperature for start frost prevention sprinkling' for frost prevention sprinkling to
stop (after either an automatic start or a manual start).

Frost prevention sprinkling will only stop once the 'Delay time for stop frost
sprinkling' has elapsed.

Duration of frost prevention sprinkling

The duration that each valve will open.

Delay time for stop frost prevention sprinkling

The duration that the valve group will remain active when the outside temperature
rises above the 'Temperature zone for stop frost prevention sprinkling'.

While frost prevention sprinkling is active, both EC and pH control and crop
pre-rinsing and post-rinsing are disabled.

Frost prevention sprinkling can be used with both fogging and roof sprinklers,
and with valve groups for normal irrigation.

Aqua CX300

41

«
...
39
40
41
42
43
...
»

Содержание Aqua CX300





























































































Отзывы:

Нет отзывов