Ridder Aqua CX300 Скачать руководство пользователя страница 80

Страница: 80 / 92

Difference of monitor EC too great: group continued

The difference between the measured control EC and the measured monitor EC is too
great ('Maximum difference of monitor EC').

Depending on the option selected for 'Response to EC/pH alarm', the program will
either be paused or irrigation will continue with fresh water.

Check the EC sensors and, if necessary, clean the sensors.

Difference of monitor EC too great, group paused

The difference between the measured control EC and the measured monitor EC is too
great (Maximum difference of monitor EC).

Depending on the option selected for 'Response to EC/pH alarm', the program will
either be paused or irrigation will continue with fresh water.

Check the EC sensors and, if necessary, clean the sensors.

Fresh water EC too high, group continued

The EC value measured during pre-rinsing or post-rinsing is too high, or the EC
controller may be switched off. The program will continue.

Check:

the EC pre-blending control
the EC value of the fresh water

Fresh water EC too high, group paused

The EC value measured during pre-rinsing or post-rinsing is too high, or the EC
controller may be switched off. The program will be paused.

Check:

the EC pre-blending control
the EC value of the fresh water

Maximum calculated EC setpoint reached, group continued

In the case of EC pre-measurement: the calculated EC exceeds the value set for
'Maximum calculated EC / alarm'. The program will continue.

Check the ‘Maximum calculated EC', the EC setpoints and the radiation influence
on the EC value.

Maximum calculated EC setpoint reached, group paused

In the case of EC pre-measurement: the calculated EC exceeds the value set for
'Maximum calculated EC / alarm'. The program will be paused.

Check the ‘Maximum calculated EC', the EC setpoints and the radiation influence
on the EC value.

Pre-mixing EC too high, group continued

The measured EC value (control, monitor or pre-blending EC) is too high.

Aqua CX300

Содержание Aqua CX300





























































































Результаты поиска

Содержание Aqua CX300

Отзывы:

Ridder Aqua CX300, Руководство пользователя, Страница: 80 / 92

Результаты поиска

Содержание Aqua CX300

Отзывы: