Ridder Aqua CX300, Руководство пользователя, Страница: 59 / 92

Time active for start flushing
The number of hours that the system pump must be active for filter flushing to start.
3.3.2.3 Flow rate measurement
Date
Time
Path: Settings>General>Flow rate measurement
Manual control
None: Not active.
Start: Start the flow rate measurement.
Stop: Stop the flow rate measurement.
Pause: Pause the flow rate measurement.
Date of flow rate measurement
The date on which the flow rate per valve should be measured.
Time of flow rate measurement
The time at which the flow rate per valve should be measured.
3.3.2.4 Assign contact start
Contact start 1 with valve no.
Contact start 1 type
Contact start 1 smooth rate
Contact start 10 with valve no.
Contact start 10 type
Contact start 10 smooth rate
Path: Settings>General>Assign contact start
Contact start 1 with valve no.
Contact start 10 with valve no. 0 - 160
The number of the valve connected to a contact start. The contact start sensor must
be present in the valve group that is covered by the valve in question.
The basic model comes with three contact starts. This can be expanded up to
ten with the Extra Starts module.
Aqua CX300
59