Ridder Aqua CX300, Руководство пользователя

Страница: 62 / 92

Flow rate 0 - 1000
The measured flow rate of the water being supplied to the relevant valve or valve
group, expressed in litres per minute.
3.4 Assign group to program
Group 01
..
Group 10
Path: Assign group to program
Select the valve group that you want to assign the valves to.
Select an irrigation program for the valve group.
Use the 'Unassign program' option to unassign the selected program from the
valve group.
One pre-set irrigation program may be assigned to each valve group.
If you wish to assign an already assigned irrigation program to another valve
group, you must first unassign the irrigation program by selecting the 'Unassign
program' option.
The name of the valve group assigned to a program can be found on the right-
hand side of the summary.
After selecting a program, press the <E> button to assign the program to the
valve group.
Use the 'Program names' and 'Group names' options to rename G01, P01, etc.,
as desired.
3.5 (De)activate valves
01 02 03 04 05 06 07 08 09 10
11 12 13 14 15 16 17 18 19 20
Path: (De)Activate valves
Press the 'Valve Menu' button to launch the menu.
Use the arrow keys to move the cursor onto the desired valve.
Press the '(De)Activate valve' button to activate or deactivate the valve.
Press the 'OK' button to confirm.
The group to which each valve has been assigned is displayed next to the selection
screen at the top right. An active valve can only be used to irrigate if it has been
assigned to a valve group. If a valve has been assigned to two valve groups, the valve
will be activated or deactivated in to both groups. See also: "Assign valves to group"
on page 17.
Aqua CX300
62