Ridder Aqua CX300 Скачать руководство пользователя страница 85 | Manualshive

Страница: 85 / 92

Ridder Aqua CX300 Скачать руководство пользователя страница 85

Check:

the measured pH value (control or monitor pH) and compare this value with the
calculated pH setpoint.
The pre-set pH setpoint
whether the 'Maximum pH zone' is set too low.

Difference of monitor pH too great: group paused

The difference between the measured control pH and the measured monitor pH is too
great ('Maximum difference of monitor pH').

Depending on the option selected for 'Response to EC/pH alarm', the program will
either be paused or irrigation will continue with fresh water.

Check:

Check the pH sensors and, if necessary, clean them.
Calibrate the pH-sensors.

Difference of monitor pH too great: group continued

The difference between the measured control pH and the measured monitor pH is too
great ('Maximum difference of monitor pH').

Depending on the option selected for 'Response to EC/pH alarm', the program will
either be paused or irrigation will continue with fresh water.

Check:

Check the pH sensors and, if necessary, clean them.
Calibrate the pH-sensors.

Fresh water pH too low, group paused

The measured pH value (control or monitor pH) is too low.

Depending on the option selected for 'Response to EC/pH alarm', the program will
either be paused or irrigation will continue with fresh water.

Check:

the measured pH value (control or monitor pH) and compare this value with the
calculated pH setpoint.
the pre-set pH setpoint
whether the 'Minimum pH zone' is set too low.

Fresh water pH too low, group continued

The measured pH value (control or monitor pH) is too low.

Depending on the option selected for 'Response to EC/pH alarm', the program will
either be paused or irrigation will continue with fresh water.

Check:

the measured pH value (control or monitor pH) and compare this value with the
calculated pH setpoint.

Aqua CX300

85

«
...
83
84
85
86
87
...
»

Содержание Aqua CX300





























































































Отзывы:

Нет отзывов