Ricoh Ri 100 Скачать руководство пользователя страница 34

Страница: 34 / 260

Checking the Supplied Items and Unpacking

the Machine

• The following explains the warning messages on the plastic bag used in this product's

packaging.

• Keep the polythene materials (bags, etc.) supplied with this machine away from babies

and small children at all times. Suffocation can result if polythene materials are brought into
contact with the mouth or nose.

• The printer weighs around 22 kg (48.5 lb).
• Hold the lift indentations at the base of the machine's sides with two people or more. Lift it

slowly and do not strain your body.

• When moving the machine, be sure to remove the cassette and manual pocket. Lifting the

machine forcefully or treating it roughly may break it or result in injury.

• Do not turn the machine on until you have read how to do so.

DSB259

Open the box and take out all supplied items. Check that all the following items are
present:

• A4 standard tray
• Protection cover
• Maintenance kit
• Power Cord
• Quick Installation Guide
• Safety Information

2. Preparing for Printing

Содержание Ri 100





































































































































































































































































Результаты поиска

Содержание Ri 100

Отзывы:

Похожие инструкции для Ri 100

Бренды по названию

Популярные бренды

Ricoh Ri 100, Руководство по эксплуатации

Результаты поиска

Содержание Ri 100

Отзывы:

Похожие инструкции для Ri 100

Бренды по названию

Популярные бренды