Ricoh Ri 100 Скачать руководство пользователя страница 188

Страница: 188 / 260

DSA368

Handling Ink Cartridges

Important points about handling ink cartridges are explained.

• The following explains the warning messages on the plastic bag used in this product's

packaging.

• Keep the polythene materials (bags, gloves, etc.) supplied with this machine away from

babies and small children at all times. Suffocation can result if polythene materials are
brought into contact with the mouth or nose.

• Keep ink and ink containers out of reach of children.

• If ink gets into contact with eyes, wash eyes immediately with running water. Consult a doctor if

necessary.

• If ink is ingested, induce vomiting by drinking a strong saline solution. Consult a doctor

immediately.

• When replacing ink, avoid getting ink on your clothing. If ink comes into contact with your

clothing, wash the stained area with cold water. Hot water will set the ink into the fabric and
make removing the stain impossible.

• When replacing ink, avoid getting ink on your skin. If ink comes into contact with your skin,

wash the affected area thoroughly with soap and water.

• When removing the ink cartridge, avoid putting your hand near the place where the ink

cartridge is installed. If ink comes in contact with your hands, wash them thoroughly with soap
and water.

8. Maintenance

186

Содержание Ri 100





































































































































































































































































Результаты поиска

Содержание Ri 100

Отзывы:

Похожие инструкции для Ri 100

Бренды по названию

Популярные бренды

Ricoh Ri 100, Руководство по эксплуатации

Результаты поиска

Содержание Ri 100

Отзывы:

Похожие инструкции для Ri 100

Бренды по названию

Популярные бренды