Ricoh Ri 100, Руководство по эксплуатации

Страница: 144 / 260

Normally, the way the ink is ejected depends on the fabric type.
If you select [Always], printing is performed unidirectionally regardless of the fabric type.
By printing unidirectionally, you can eliminate differences in ink ejection timing and so prevent
misregistration when printing thin lines.
If you select [Auto Detect], printing is performed according to the settings of the [Garment Type:]
specified in the printer driver.
Normally, select [Auto Detect]. When printing is performed on fabrics of varied thicknesses or a
vertical aberration or blurring occurs, select [Always].
• Auto Detect
• Always
Default: [Auto Detect]
Img Recov. Error
You can specify whether or not [Page Recovery Error] is reported.
• Display
• Do not Display
Default: [Display]
Ink C.U. Space
You can check the remaining capacity of the ink collector unit.
Changing the [System] Menu
The following procedure is an example of setting the Energy Saver mode.
1. Press the [ /Menu] key.
2. Press [ ] or [ /Menu] key to display [System], and then press the [#Enter] key.
<Menu>
System
3. Press [ ] or [ /Menu] key to display [Energy Saver], and then press the [#Enter] key.
<System>
Energy Saver
4. Press the [#Enter] key.
5. Press [ ] or [ /Menu] key to select the lead time needed to switch to the Energy Saver
mode.
<E.Saver Timer>
*5 minutes
5. Machine Setup Menus
142